LSA-PLUS series 2/8 krone lsa module for back munt frame

LSA-PLUS series 2/8 krone lsa module for back munt frame

Descriptions:

1) It is used throughout the distribution level, in the main distribution frame (MDF), in the cross connection cabinet (CCC) and in the distribution point (DP) boxes. It is highly reliable and cost-effective wire connection system for modern telecommunications and data networks.

2) It adopts IDC (Insulation Displacement Connection) technique, which means that no soldering, wire-stripping or the use of screws is necessary, and which clamps the wires at a 45 degree angle, thus dramatically reducing the risk of a poor termination and increasing the wiring productivity. The IDC contact is phosphor bronze, with silver plating.

3) It use a normally closed two piece contact, with a convenient disconnection feature. By inserting a disconnect plug into a wire pair, you can temporarily or permanently disconnect the circuit. A test cord can be inserted into a pair to test each side of the circuit independently. This greatly accelerates fault identification.

4) The center contact point can also be used for monitoring or overvoltage protection.

Main Features:

• 1. Insulation Displacement Connection
• 2. No Wire-stripping, screw and solder free
• 3. Reliable connections
• 4. Clear labeling
• 5. Flame retardant performance
• 6. Modular design and installations
• 7. Gas tight connection
• 8. Disconnetion and connection available
• 9. One push wire insertion

Krone type lsa earth module and earth profile module 10 pair

• JA-1003: 8 pair lsa disconnetion module
• JA-1003C: 8 pair lsa connection module